View IRF8010_191766.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PD - 94497
SMPS MOSFET
Applications High frequency DC-DC converters UPS and Motor Control Benefits Low Gate-to-Drain Charge to Reduce Switching Losses Fully Characterized Capacitance Including Effective COSS to Simplify Design, (See App. Note AN1001) Fully Characterized Avalanche Voltage and Current Typical RDS(on) = 12m
IRF8010
HEXFET(R) Power MOSFET
VDSS
100V
RDS(on) max
15m
ID
80A
TO-220AB
Absolute Maximum Ratings
Parameter
ID @ TC = 25C ID @ TC = 100C IDM PD @TC = 25C VGS dv/dt TJ TSTG Continuous Drain Current, VGS @ 10V Continuous Drain Current, VGS @ 10V Pulsed Drain Current Power Dissipation Linear Derating Factor Gate-to-Source Voltage Peak Diode Recovery dv/dt Operating Junction and Storage Temperature Range Soldering Temperature, for 10 seconds Mounting torque, 6-32 or M3 screw 300 (1.6mm from case ) 1.1(10) N*m (lbf*in)
Max.
80 57 320 260 1.8 20 16 -55 to + 175
Units
A W W/C V V/ns C
Thermal Resistance
Parameter
RJC RCS RJA Junction-to-Case Case-to-Sink, Flat, Greased Surface Junction-to-Ambient
Typ.
--- 0.50 ---
Max.
0.57 --- 62
Units
C/W
Notes
through
are on page 8
www.irf.com
1
08/23/02
IRF8010
Static @ TJ = 25C (unless otherwise specified)
Parameter
V(BR)DSS V(BR)DSS/TJ RDS(on) VGS(th) IDSS IGSS Drain-to-Source Breakdown Voltage Breakdown Voltage Temp. Coefficient Static Drain-to-Source On-Resistance Gate Threshold Voltage Drain-to-Source Leakage Current Gate-to-Source Forward Leakage Gate-to-Source Reverse Leakage
Min. Typ. Max. Units
100 --- --- 2.0 --- --- --- --- --- 0.11 12 --- --- --- --- --- --- --- 15 4.0 20 250 200 -200 nA V
Conditions
VGS = 0V, ID = 250A
V/C Reference to 25C, ID = 1mA m VGS = 10V, ID = 45A V A VDS = VGS, ID = 250A VDS = 100V, VGS = 0V VDS = 100V, VGS = 0V, TJ = 125C VGS = 20V VGS = -20V
Dynamic @ TJ = 25C (unless otherwise specified)
Parameter
gfs Qg Qgs Qgd td(on) tr td(off) tf Ciss Coss Crss Coss Coss Coss eff. Forward Transconductance Total Gate Charge Gate-to-Source Charge Gate-to-Drain ("Miller") Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Input Capacitance Output Capacitance Reverse Transfer Capacitance Output Capacitance Output Capacitance Effective Output Capacitance
Min. Typ. Max. Units
82 --- --- --- --- --- --- --- --- --- --- --- --- --- --- 81 22 26 15 130 61 120 3830 480 59 3830 280 530 --- 120 --- --- --- --- --- --- --- --- --- --- --- --- pF ns nC V ID = 80A VDS = 80V VGS = 10V VDD = 50V ID = 80A RG = 39 VGS = 10V VGS = 0V VDS = 25V
Conditions
VDS = 25V, ID = 45A
= 1.0MHz VGS = 0V, VDS = 1.0V, = 1.0MHz VGS = 0V, VDS = 80V, = 1.0MHz VGS = 0V, VDS = 0V to 80V
Avalanche Characteristics
EAS IAR EAR Parameter Single Pulse Avalanche Energy Avalanche Current Repetitive Avalanche Energy Typ. --- --- --- Max. 310 45 26 Units mJ A mJ
Diode Characteristics
Parameter
IS ISM VSD trr Qrr ton Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) Diode Forward Voltage Reverse Recovery Time Reverse RecoveryCharge Forward Turn-On Time
Min. Typ. Max. Units
--- --- --- --- --- --- --- --- 99 460 80 A 320 1.3 150 700 V ns nC
Conditions
MOSFET symbol showing the integral reverse
G S D
p-n junction diode. TJ = 25C, IS = 80A, VGS = 0V
TJ = 150C, IF = 80A, VDD = 50V di/dt = 100A/s
Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD)
2
www.irf.com
IRF8010
10000
TOP VGS 15V 12V 10V 6.0V 5.5V 5.0V 4.5V 4.0V
1000
TOP VGS 15V 12V 10V 6.0V 5.5V 5.0V 4.5V 4.0V
ID, Drain-to-Source Current (A)
1000
ID, Drain-to-Source Current (A)
100
BOTTOM
100
BOTTOM
4.0V
10
10
4.0V
1
20s PULSE WIDTH Tj = 25C
0.1 0.1 1 10 100
20s PULSE WIDTH Tj = 175C
1 0.1 1 10 100
VDS, Drain-to-Source Voltage (V)
VDS, Drain-to-Source Voltage (V)
Fig 1. Typical Output Characteristics
Fig 2. Typical Output Characteristics
1000
3.5
I D = 80A
ID, Drain-to-Source Current ()
T J = 175C
RDS(on) , Drain-to-Source On Resistance
3.0
2.5
100
(Normalized)
2.0
10
T J = 25C
1.5
1.0
VDS = 50V 20s PULSE WIDTH
1 2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0
0.5
V GS = 10V
0.0 -60 -40 -20 0 20 40 60 80 100 120 140 160 180
VGS , Gate-to-Source Voltage (V)
TJ , Junction Temperature
( C)
Fig 3. Typical Transfer Characteristics
Fig 4. Normalized On-Resistance Vs. Temperature
www.irf.com
3
IRF8010
100000 VGS = 0V, f = 1 MHZ Ciss = C gs + Cgd, C ds SHORTED Crss = Cgd Coss = Cds + Cgd
12
VGS , Gate-to-Source Voltage (V)
ID= 80A VDS= 80V VDS= 50V VDS= 20V
10 8 6 4 2 0
10000
C, Capacitance(pF)
Ciss
1000
Coss
100
Crss
10 1 10 100
0
20
40
60
80
100
VDS, Drain-to-Source Voltage (V)
Q G Total Gate Charge (nC)
Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage
Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage
1000
10000 OPERATION IN THIS AREA LIMITED BY R DS(on)
100
TJ = 175 C
10
ID, Drain-to-Source Current (A)
1000
I SD , Reverse Drain Current (A)
100 100sec 10 1msec 1 Tc = 25C Tj = 175C Single Pulse 1 10 10msec
T J= 25 C
1
V GS = 0 V
0.1 0.0 0.5 1.0 1.5 2.0
0.1 100 1000 VDS, Drain-to-Source Voltage (V)
V SD ,Source-to-Drain Voltage (V)
Fig 7. Typical Source-Drain Diode Forward Voltage
Fig 8. Maximum Safe Operating Area
4
www.irf.com
IRF8010
80
VDS
LIMITED BY PACKAGE
RD
VGS
60
D.U.T.
+
RG
-VDD
ID , Drain Current (A)
10V
40
Pulse Width 1 s Duty Factor 0.1 %
Fig 10a. Switching Time Test Circuit
20
VDS 90%
0 25 50 75 100 125 150 175
TC , Case Temperature ( C)
10% VGS
Fig 9. Maximum Drain Current Vs. Case Temperature
td(on)
tr
t d(off)
tf
Fig 10b. Switching Time Waveforms
10
(Z thJC ) Thermal Response
1
D = 0.50 P DM t1 t2 SINGLE PULSE (THERMAL RESPONSE) Notes: 1. Duty factor D = 2. Peak T 0.01 0.00001 0.0001 0.001 0.01 t1/ t 2 +T C 1
0.20 0.1 0.10 0.05 0.02 0.01
J = P DM x Z thJC
0.1
t 1, Rectangular Pulse Duration (sec)
Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case
www.irf.com
5
IRF8010
15V
600
TOP
VDS
L
DRIVER
500
BOTTOM
ID 18A 32A 45A
EAS , Single Pulse Avalanche Energy (mJ)
400
RG
20V
D.U.T
IAS tp
+ V - DD
A
300
0.01
Fig 12a. Unclamped Inductive Test Circuit
200
100
V(BR)DSS tp
0 25 50 75 100 125 150 175
Starting Tj, Junction Temperature
( C)
I AS
Fig 12c. Maximum Avalanche Energy Vs. Drain Current
Fig 12b. Unclamped Inductive Waveforms
Current Regulator Same Type as D.U.T.
QG
50K 12V .2F .3F
10 V
QGS VG QGD
D.U.T. VGS
3mA
+ V - DS
Charge
IG
ID
Current Sampling Resistors
Fig 13a. Basic Gate Charge Waveform
Fig 13b. Gate Charge Test Circuit
6
www.irf.com
IRF8010
Peak Diode Recovery dv/dt Test Circuit
D.U.T
+
Circuit Layout Considerations * Low Stray Inductance * Ground Plane * Low Leakage Inductance Current Transformer
+ +
-
RG
* * * *
dv/dt controlled by RG Driver same type as D.U.T. ISD controlled by Duty Factor "D" D.U.T. - Device Under Test
+ VDD
Driver Gate Drive P.W. Period D=
P.W. Period VGS=10V
*
D.U.T. ISD Waveform Reverse Recovery Current Body Diode Forward Current di/dt D.U.T. VDS Waveform Diode Recovery dv/dt
VDD
Re-Applied Voltage Inductor Curent
Body Diode
Forward Drop
Ripple 5%
ISD
* VGS = 5V for Logic Level Devices Fig 14. For N-Channel HEXFET(R) Power MOSFETs
www.irf.com
7
IRF8010
TO-220AB Package Outline
Dimensions are shown in millimeters (inches)
2.87 (.113) 2.62 (.103) 10.54 (.415) 10.29 (.405) 3.78 (.149) 3.54 (.139) -A6.47 (.255) 6.10 (.240) -B4.69 (.185) 4.20 (.165) 1.32 (.052) 1.22 (.048)
4 15.24 (.600) 14.84 (.584)
1.15 (.045) MIN 1 2 3
LEAD ASSIGNMENTS 1 - GATE 2 - DRAIN 3 - SOURCE 4 - DRAIN
14.09 (.555) 13.47 (.530)
4.06 (.160) 3.55 (.140)
3X 3X 1.40 (.055) 1.15 (.045)
0.93 (.037) 0.69 (.027) M BAM
3X
0.55 (.022) 0.46 (.018)
0.36 (.014)
2.54 (.100) 2X NOTES: 1 DIMENSIONING & TOLERANCING PER ANSI Y14.5M, 1982. 2 CONTROLLING DIMENSION : INCH
2.92 (.115) 2.64 (.104)
3 OUTLINE CONFORMS TO JEDEC OUTLINE TO-220AB. 4 HEATSINK & LEAD MEASUREMENTS DO NOT INCLUDE BURRS.
TO-220AB Part Marking Information
EXAMPLE : THIS IS AN IRF1010 WITH ASSEMBLY LOT CODE 9B1M
A
INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE
PART NUMBER IRF1010 9246 9B 1M
Notes: Repetitive rating; pulse width limited by max. junction temperature. Starting TJ = 25C, L = 0.31mH, RG = 25, IAS = 45A. ISD 45A, di/dt 110A/s, VDD V(BR)DSS, TJ 175C.
DATE CODE (YYWW) YY = YEAR WW = WEEK
Pulse width 300s; duty cycle 2%. Coss eff. is a fixed capacitance that gives the same charging time as Coss while VDS is rising from 0 to 80% VDSS. Calculated continuous current based on maximum allowable junction temperature. Package limitation current is 75A.
TO-220 package is not recommended for Surface Mount Application.
Data and specifications subject to change without notice. This product has been designed and qualified for the Industrial market. Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information.08/02
8
www.irf.com

▲Up To Search▲

Price & Availability of IRF8010

	To Download IRF8010 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .